Want create site? Find Free WordPress Themes and plugins.

Plumbing Pipes Fittings

Fittings for ASTM Plain ended pipes are available in Schedule 80 series in white colour. The joint, by use of solvent cemen, is a permanent homogeneous joint. Such type of a joint in also in general terms, referred as cold welding.

COUPLER
To join two lengths of pipes

Size (M)
½” ¾” 1” 1¼” 1 ½”
2” 2 ½” 3” 4”
ELBOW
To give 90 deg. turn to a pipe line.

Size (M)
½” ¾” 1” 1¼” 1 ½”
2” 2 ½” 3” 4”
ELBOW (45 deg.)
To give 45 deg. turn to a pipe line.

Size
½” ¾” 1” 1¼” 1 ½”
2” 2 ½” 3” 4”
REDUCING BUSH
To reduce the internal diameter of fitting

Size (M1×M2)
¾”× ½” 1 × ¾” 1¼”×1” 1 ½”× 1¼” 2 ½” × 2”
3” × 2 ½” 4” × 3”
REDUCING TEE
To take a reducing bypass or service line from a main line

Size (M1×M2)
¾” ×½” 1 × ¾” 1× ½” 1¼”×½” 1¼”× ¾”
1¼” ×1” 1 ½”×½” 1 ½”×¾” 1 ½”×1” 1 ½”×¼”
2” × ½” 2” × ¾” 2” ×1” 2” ×1¼” 2” ×1 ½”
2 ½” ×¾” 2 ½”×1” 2 ½”×1¼” 2 ½”×1 ½” 2 ½”×2”
3” × ½” 3” × ¾” 3” ×1” 3” ×1¼” 3” ×1 ½”
3” × 2” 3” ×2 ½” 4” ×½” 4” ×¾” 4” × 1”
4” × 1¼” 4” ×1 ½” 4” ×2” 4” ×2 ½” 4” ×3”
REDUCER
To reduce the main line

Size (M1×M2)
¾” ×½” 1 × ¾” 1× ½” 1¼”×½” 1¼”× ¾”
1¼” ×1” 1 ½”×½” 1 ½”×¾” 1 ½”×1” 1 ½”×¼”
2” × ½” 2” × ¾” 2” ×1” 2” ×1¼” 2” ×1 ½”
2 ½” ×¾” 2 ½”×1” 2 ½”×1¼” 2 ½”×1 ½” 2 ½”×2”
3” × ½” 3” × ¾” 3” ×1” 3” ×1¼” 3” ×1 ½”
3” × 2” 3” ×2 ½” 4” ×½” 4” ×¾” 4” × 1”
4” × 1¼” 4” ×1 ½” 4” ×2” 4” ×2 ½” 4” ×3”
REDUCING TEE
To take a by pass or a service line from the main line

Size (M)
½” ¾” 1” 1¼” 1 ½”
2”
END CAP
To plug the end of a pipeline

Size (M)
½” ¾” 1” 1¼” 1 ½”
2”
FTA
To connect male threaded fittings to a pipeline.

Size
½” ¾” 1” 1¼” 1 ½” 2”
MTA
To connect female threaded fittings to a pipeline

Size
½” ¾” 1” 1¼” 1 ½” 2”
FEMALE TREADED TEE
(METAL INSERT) To connect male threaded CP/Metal fittings like taps, showever etc. to pipeline.

Size (M)
½” ¾” 1” ¾”× ½”
FEMALE THREADED (900) ELBOW
(METAL INSERT) To connect male threaded CP/Metal fittings like taps, showers etc. to a pipeline.

Size (M)
½” ¾” 1”
FTA : (METAL INSERT)
To connect male threaded CP/Metal fittings like taps, showers etc. to a pipeline.

Size (M)
½” ¾” 1”
MTA : (METAL INSERT)
To connect female threaded CP/Metal fittings like taps, showers etc. to a pipeline.

Size (M)
½” ¾” 1”
CROSS TEE
To take a double bypass or service lines from a main line

Size (M)
½” ¾” 1”

 

Did you find apk for android? You can find new Free Android Games and apps.